Trowel-OnCode VWS

Versus Suede

Name: Versus Suede
Brand: Versus Paint

Softly floated quartz

Spread rate

5 kg/m²

Everything about Versus Suede

Description: A full-bodied, trowel-applied texture with a dense quartz surface and softly worked movement. The finish is floated by hand, allowing gentle vertical or more organic variation across the wall rather than a perfectly uniform pattern.
Look: Softly floated quartz
Application: Applied by steel trowel and floated with a plastic float
Composition: Quartz based, making it a more pronounced finish
Consumption: 5 kg/m².
Colours: Any colour.
Suitability: For internal and external use
Pack sizes: 20L bucket (±32 kg) · 300 kg drum

Deep and bright colours are charged at a higher price (POA).

Technical specification

From the published Versus data sheet, 2019. Figures under review.

Use: Interior and exterior, walls and ceilings.
Substrates: Cement plaster, concrete, gypsum (Rhinolite), steel, glass, OSB board, fibre-cement board (Nutec), wood; also sound previously painted surfaces.
Applied thickness: 2.5 mm.
Elasticity: 0.5 mm per 10 cm.
VOC: < 13 g/l.
Application: Steel trowel, texturised with a plastic float.

Specifier notes

From the published Versus data sheet, 2019. Figures under review.

Spread rates are a guide only; actual rates vary with the surface.
Order the full quantity at once to eliminate batch variance; Versus cannot be held liable for colour variation on insufficient orders.
Signed colour sample panels are required before manufacture.
Maximum recommended application panel: 10 m². Remedial work requires the full panel to be redone.
Scaffold corner-to-corner, or v-joint to v-joint, tape-joint to tape-joint, construction joint to construction joint.
All horizontal surfaces waterproofed with Versus Versa-Proof. Treat all damp first — coatings do not stop damp.
Surface preparation per SABS 1514:1993 and SANS 2001-EM1:2007.
Do not thin premixed coatings — thinning causes colour variation.
Do not apply in direct sunlight or if rain is expected within 4–6 hours.
Drying 12–24 hours is typical for trowel coatings, climate dependent.
Shelf life minimum 12 months unopened. Water based, non-flammable, lowest fire rating.
High-pigment and bright colours fade uniformly over time.
For best results apply by an experienced applicator.