Trowel-OnCode VWTT

Tershan Trowel

Name: Tershan Trowel
Brand: Versus Paint

Stone-rich trowelled plaster

Spread rate

5 kg/m²

Everything about Tershan Trowel

Description: A substantial trowelled plaster containing stone aggregate within a coloured base. The surface is levelled rather than floated into pronounced movement, creating a dense, stone-rich texture with the colour and aggregate reading together as one finish.
Look: Stone-rich trowelled plaster
Application: Applied by steel trowel
Composition: Natural stone in an acrylic binder
Consumption: 5 kg/m².
Colours: Natural colour only.
Suitability: For internal and external use
Pack sizes: 20L bucket (±32 kg) · 300 kg drum

Technical specification

From the published Versus data sheet, 2019. Figures under review.

Use: Interior and exterior, wall surfaces (the sheet does not list ceilings).
Substrates: Cement plaster, concrete, gypsum (Rhinolite), steel, glass, OSB board, fibre-cement board (Nutec), wood; also sound previously painted surfaces.
Shelf life: Minimum 12 months unopened.
Fire: Non-flammable, lowest fire rating.
Horizontal surfaces: Must be waterproofed with Versus Versa-Proof.
Application rules: Do not apply in direct sunlight. Maximum panel 10 m². Scaffold and tape-joint rules as for Venetian Stucco.
Tape joints: Set out, marked, primed, painted with two coats of Versus Aqua Ripple, then overcoated in the desired colour on completion.

Specifier notes

From the published Versus data sheet, 2019. Figures under review.

Spread rates are a guide only; actual rates vary with the surface.
Order the full quantity at once to eliminate batch variance; Versus cannot be held liable for colour variation on insufficient orders.
Signed colour sample panels are required before manufacture.
Maximum recommended application panel: 10 m². Remedial work requires the full panel to be redone.
Scaffold corner-to-corner, or v-joint to v-joint, tape-joint to tape-joint, construction joint to construction joint.
All horizontal surfaces waterproofed with Versus Versa-Proof. Treat all damp first — coatings do not stop damp.
Surface preparation per SABS 1514:1993 and SANS 2001-EM1:2007.
Do not thin premixed coatings — thinning causes colour variation.
Do not apply in direct sunlight or if rain is expected within 4–6 hours.
Drying 12–24 hours is typical for trowel coatings, climate dependent.
Shelf life minimum 12 months unopened. Water based, non-flammable, lowest fire rating.
High-pigment and bright colours fade uniformly over time.
For best results apply by an experienced applicator.